|
+ ACROMAG
|
 |
|
+ ADLINK
|
|
|
+ ANALOG DEVICES
|
|
|
+ LEXAR CRUCIAL
|
|
|
+ LIPPERT
|
|
|
+ SCS
|
|
|
+ TE CONNECTIVITY
|
|
|
+ WRC
|
|
|
Hurricane-LX800
 EPIC SBC - AMD GeodeT LX800 - 500MHz
Features - Technical Data - Data Sheet
The Hurricane-LX800 is an EPIC standard formatted single-board computers using AMD’s powerful yet energy-efficient Geode™ LX800(at)0.9W processor, running at 500MHz. This module integrates all peripherals needed to build an embedded PC on a small 115 mm x 165 mm (4.5” x 6.5”) printed circuit board. Using a CS5536 I/O companion and a Super I/O chip, all the standard peripherals are already on board.
The Hurricane-LX800 uses only a mere 5,3 watts and can operate in the extended temperature range of –40°…+85°C without additional cooling. It is supplied with 5V only and supports ACPI, advanced and PCI power management.
Application areas for the Hurricane-LX800 are industrial automation, automotive, medical devices, and military. |
|
| Hurricane-LX800: Features |
- AMD Geode™ LX800 Processor @ 500 MHz
- 2 x RS232/RS422/RS485
- 1 GB DDR333 RAM
- Graphics: 1920 x 1440 pixel
- CRT, TFT, LVDS
- IDE Ultra ATA100
- 2 x Ethernet
- 4 x USB 2.0
|
Analog and Digital I/O
Only 5.25 W power consumption
Extended temperature range -40 ... +85°C
PC/104, PC/104-Plus
MiniPCI slot
Watchdog
AC97 5.1 Sound
|
| Hurricane-LX800: Technical Data |
| Board Format |
EPIC, 115 mm x 165 mm (4.5” x 6.5”) |
| Processor |
AMD Geode™ LX800 |
| Speed |
500 MHz |
| Core logic |
I/O companion: CS5536
Super I/O: ITE8712 |
RAM (max.)
|
1 GB DDR333-SODIMM |
| RAM clock |
333 MHz |
| PCI Express |
Integrated inLX800
up to 254 MB video memory |
| Graphics |
High Definition Audio Controller supports
4 audio streams; 2 in, 2 out
• 1.8 V and 3.3 V I/O is supported
• Docking is supported
• Each stream can obtain up to 16 channels |
| CRT |
Analog VGA
1920 x 1440 pixel at 85 Hz max. |
| LVDS |
Single channel, 24 bits
1600 x 1200 pixel at 60 Hz max. |
| TFT |
18 bits
1600 x 1200 pixel |
| USB |
4 x USB 2.0 |
| Ethernet |
100/10 MBit Micrel KSZ8842 dual
port Ethernet switch |
| Serial |
2 x RS232/RS422/RS485 |
| IDE |
1 x Ultra ATA100 (ATA6) port |
| Floppy |
Up to 2.44 MB |
| uDOC |
10 pin header for USB 2.0 Flash
Drives |
|
Sound I/O
|
AC97, 6-channel (5.1) audio with
3.5 mm connector |
Digital I/O
|
29 general purpose I/O signals |
Analog I/O
|
8 channels, 8 bit, 0...4.096V |
High Speed
Input Port |
Raw 16 bit input with 300 Mb/s
isochronous capture
Video: VESA 1.1, 2.0 and BT.656 compliant. |
| Watchdog |
yes |
| Status LED |
HDD, power, standby |
Operating
temperature |
-20°C … +60°C
-40°C … +85°C (optional) |
| ISA Bus |
PC/104, with full DMA capability |
| PCI Bus |
PC/104-Plus
MiniPCI, 3.3 V compliant |
| LPC Bus |
Available |
| Power Supply |
10 pin mini-ATX power connector
5 V +/- 5 % All necessary voltages are
generated on-board. |
| Power Consumption |
5.25 W typical
7 W maximum |
| Cooling |
Not required |
| MTBF |
>100.000 h (t.b.d.) |
| BIOS |
t.b.d. |
| Supported OS |
Windows XP, XP Embedded,
Windows CE, Linux, VxWorks |
|
| Hurricane-LX800: Downloads |
|
Ph: 1.248.615.4441
